What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 24.06.2025 01:50
Here is a simplified AC power diagram.
An AC voltage/ current source, and an ac inductive load.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
USMNT, messy and meek, unravels quickly for its fourth straight defeat - The Washington Post
The MOV will conduct when the voltage exceeds 50% of line voltage.
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Scientists discover that dogs can alert humans to this quickly-spreading disease - Earth.com
It also is a device that limits the change in current flow.
There are three different concepts here that are getting confused.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What are some questions obviously just asked for sexual gratification?
He then describes Rainy Season and Lightning.
a photo is worth a thousand words.
He then asserts :
Ancient miasma theory may help explain Health Secretary Robert F. Kennedy Jr.'s vaccine moves - NPR
A circuit breaker is similar, but is resettable.
2024–10–10[John johnson John Johnson ]
These devices are installed between the “hot” and “neutral” and protective ground.
What historical event or person have you surprised hasn't been made into a Hollywood movie yet?
The other is “what does a “fuse” do?”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here Are the 2025 BET Awards Winners: Full List - Billboard
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
I Sampled All the Best Mushroom Gummies—Here’s What I Found - WIRED
One is “what exactly is in a ‘surge protector’ ? ”
These are simplified answers to the original question, and does not change anything I wrote above.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Judge extends order suspending Trump’s block on Harvard’s incoming foreign students - CNN
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Now when you have a certain ac resistance, then a current flows in a loop.
the problem then depends on "how fast does the fuse operate?".
what exactly is a ‘surge’ protector?
Why do liberals think it is okay to steal votes while the rest of us obey the law(s)?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This device then solves the entire problem.
Because the load is inductive, the current lags the voltage.(by a bit).
How can parents identify and address early signs of racial bias in young children?
[image of Common-mode choke]
This is 'the assistant's answer'
nine
Why do so many 18 to 29-year-old men struggle in dating?
so, what happens?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
Secret Characters in Elden Ring Nightreign: How to Unlock the Revenant and Duchess - CNET
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But… the neutral is now “floating” because of the 1 ohm resistance.
Former Charles Manson follower is recommended for parole - NBC News
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The bolt then partially travels down the line to your home.
2024–10–16 [ OO OLAOYE OYEBODE ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The third is lightning and “how it gets conducted into a home.”
What does a fuse do?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is where the MOV conducts again, and dissipated the energy.
A fuse is a non-resetable over current circuit protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
For this case there are devices called Metal oxide varistors (MOV).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Upvotes:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
What is lightning?
Barnstars:
But it can get overloaded, and no longer works.
He then describes the function of a fuse.
eight
First Sentence:
but I think this circuit , shows a few more pieces.
I post the exact comment here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One
So, the voltage could go up to 500 volts, and the fuse will not open up.
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but this device (an Inductor) … impedes the rapid changes in the current.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
At least they know the answer if they wanted it.
This one hit behind the barn.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Edit 2024–10.
There are two important concepts here.